Xerox WorkCentre PE120-120i-3124 - Manual (Page 73)

Paper Handling 3.7
3
3 Load the print material with the side to be printed on
facing up.
For envelopes, load them with the flap side down and with
the stamp area on the top left side.
N OTES :
• If envelopes jam while printing, try reducing the number of
envelopes in the Bypass tray.
• If you want to print on previously printed paper from the Bypass
tray, the printed side should be facing down.
4 Squeeze the width guide and adjust it to the width of the
print material without bending it.
5 After loading paper, you need to set the paper type and size
for the Bypass tray. See page 2.21 for copying and faxing
or page 4.6 for PC-printing.
N OTE : The settings made from the printer driver override the
settings on the control panel.