Xerox WorkCentre PE120-120i-3124 - Manual (Page 108)

Copying 5.4
Making Copies on the Document
Glass
1 Lift and open the document cover.
2 Place the document face down on the document glass and
align it with the registration guide at the top left corner of
the glass.
N OTE : Make sure that no documents are in the ADF (Automatic
Document Feeder). If a document is detected in the ADF, the
machine gives it priority over the document on the document
glass.
3 Close the document cover.
N OTES :
• Leaving the cover open while copying may affect copy quality
and toner consumption.
• If you are copying a page from a book or magazine, lift the cover
until its hinges are caught by the stopper and then close the
cover. If the book or magazine is thicker than 30 mm, start
copying with the cover open.