Xerox WorkCentre PE120-120i-3124 - Manual (Page 64)

Getting Started 2.38
3 From Programs, select Xerox WC PE120 Series and then
ControlCentre.
The ControlCentre window opens.
4 The ControlCentre window provides the following tabs:
Scan Settings, Phonebook (only for the WorkCentre
PE120/120i), Printer, and Firmware Update.
To exit, click the Exit button at the bottom of each tab.
For further details, click the Help button at the bottom of
each tab.
The Scan Settings Tab
Click the Scan Settings tab to configure the scan destination
list that appears on the control panel display when you press
Scan-to... on the control panel. Using the destination list, you
can select a software program that an image can be scanned to.
You can also configure the scan settings, such as the output type
and resolution.
Downloads the
settings made in the
ControlCentre to your
machine.
Click to restore the
default settings.
Select the program
you want from the
Available Scan
Destinations and click
to add it to the
Front Panel
Destination List. To
delete the selected
program, click .