Xerox WorkCentre PE120-120i-3124 - Manual (Page 156)

Faxing 7.30
6 Press Enter to confirm the number on the display. The
display asks you to enter another fax number to which to
send the document.
N OTE : The Another No. prompt does not appear if you have added
numbers for another broadcast or delay fax job. You must wait
until the job is completed.
7 To enter more fax numbers, press 1 to select “Yes” and
repeat steps 5 and 6. You can add up to 10 destinations.
Note that you cannot use more than one group dial number
in any one broadcast.
8 When you finish entering fax numbers, press 2 to select
“No
” at the Another No. prompt.
The display asks you to enter a name.
9 To assign a name to the transmission, enter the name you
want. For details about entering characters, see page 2.17.
If you do not want to assign a name, skip this step.
10 Press Enter. The display shows the current time and asks
you to enter the starting time when the fax is to be sent.
11 Enter the time using the number keypad.
To select “AM” or “PM” for 12-hour format, press the or
button or any number button.
If you set a time earlier than the current time, the
document will be sent at that time on the following day.
12 Press Enter when the starting time displays correctly.
13 The document is scanned into memory before transmission.
The display shows memory capacity and the number of
pages being stored in memory.
For a document placed on the document glass, the display
asks if you want to load another page. Select “1.Yes” to
add. Otherwise, select “2.No.”