Xerox WorkCentre PE120-120i-3124 - Manual (Page 141)

Faxing 7.15
7
Loading Paper for Receiving Faxes
The instructions for loading paper in the paper tray are the same
whether you are printing, faxing, or copying, except that faxes
can only be printed on Letter-, A4-, or Legal-sized paper. For
details about loading paper and setting the paper size in the
tray, see page 2.7 and page 2.21.
Receiving Automatically in Fax
Mode
Your machine is preset to Fax mode at the factory.
When you receive a fax, the machine answers the call on a
specified number of rings and automatically receives the fax.
To change the number of rings, see page 7.3.
If you want to adjust the ringer volume, see “Setting Sounds”
on page 2.22.
Receiving Manually in Tel Mode
You can receive a fax call by picking up the handset of the
extension phone and then pressing the remote receive code (see
page 7.4), or press Manual Dial (you can hear a fax tone from
the sending machine) and then pressing Start on the control
panel of your machine.
The machine begins receiving a fax and returns to Standby
mode when the reception is completed.