Xerox WorkCentre PE120-120i-3124 - Manual (Page 48)

Getting Started 2.22
If the optional Tray 2 is installed, “Tray1 Size” displays on
the bottom line.
3 If ther is no optional Tray 2 installed, press Enter.
If the optional second tray is installed, use the scroll button
(W or X) to select the paper tray you want to use and press
Enter.
4 Use the scroll button (W or X) to select the correct paper
size and press Enter.
5 Press Exit.
6 Press the X button to scroll to “Paper Type” and press
Enter to access the menu item.
7 Use the scroll button (W or X) to find the paper type you
are using and press Enter to save it.
8 To return to Standby mode, press Stop/Clear.
Setting Sounds
You can control the following sounds:
• Speaker: You can turn on or off the sounds from the
telephone line through the speaker, such as the dial tone or a
fax tone. With this option set to “Comm.” the speaker is on
until the remote machine answers.
• Ringer: You can adjust the ringer volume.
• Key Sound: With this option set to “On” a key tone sounds
each time a key is pressed.
• Alarm Sound: You can turn the alarm sound on or off. With
this option set to “On” an alarm tone sounds when an
error occurs or fax communication ends.
• You can adjust the volume level using the Manual Dial
button.