Xerox WorkCentre PE120-120i-3124 - Manual (Page 50)

Getting Started 2.24
Setting the Dial Mode
You can select the type of the telephone dial system where your
machine is connected.
N OTE : The Dial Mode setting may be unavailable depending on
your country.
1 Press Menu until “Fax Setup” appears on the top line of the
display.
2 Press the scroll button (W or X) until “Dial Mode” appears
on the bottom line of the display.
3 Press Enter.
4 Press the scroll button (W or X) to select the desired dial
mode.
Select “Tone” if your machine is connected to a tone dial
line.
Select “Pulse” if your machine is connected to a pulse dial
line.
5 Press Enter to save the selection.
To return to Standby mode, press Stop/Clear.
Using the Save Modes
Toner Save Mode
Toner Save mode allows your machine to use less toner on each
page. Activating this mode extends the life of the toner cartridge
beyond what one would experience in the normal mode, but it
reduces print quality.
To turn the toner save mode on or off, press Toner Save.
• If the button backlight is on, the mode is active and the
machine uses less toner when printing a document.
• If the button backlight is off, the mode is deactivated and
the machine prints with the normal quantity of toner.