Xerox WorkCentre PE120-120i-3124 - Manual (Page 77)

Paper Handling 3.11
3
Printing to the Rear Output Slot (Face up)
Using the rear output slot, paper comes out of the machine
face up.
Printing from the Bypass tray to the rear output slot provides a
straight paper path. Using the rear output slot might improve
the output quality with the following:
• envelopes
• labels
• small custom-sized paper
• postcards
• transparencies
To use the rear output slot:
1 Open the rear door by pulling it upward.
C AUTION : The fuser area inside the rear door of your machine
becomes very hot when in use. Take care not to burn your fingers
when you access this area.