Xerox WorkCentre PE120-120i-3124 - Manual (Page 138)

Faxing 7.12
Sending a Fax Manually
1 Load the document(s) face up into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see page 7.6.
2 Adjust the document resolution to suit your fax needs (see
page 7.9).
If you need to change the darkness, see page 7.3.
3 Press Manual Dial. You hear a dial tone.
4 Enter the receiving fax machine’s number using the number
keypad.
You can use one-touch keypad. For details about storing a
number, see page 7.19.
5 When you hear a high-pitched fax signal from the remote
fax machine, press Start.
N OTE : When you want to cancel a fax job, press Stop/Clear at
any time while sending.
Redialing the Last Number
To redial the number you last called:
Press Redial/Pause.
When a document is loaded in the ADF (Automatic Document
Feeder; see page 7.6), the machine automatically begins to
send.
For a document placed on the document glass, the display asks
if you want to load another page. Select “1.Yes” to add.
Otherwise, select “2.No.”