Xerox WorkCentre PE120-120i-3124 - Manual (Page 251)

U SING W INDOWS P OST S CRIPT D RIVER (WorkCentre PE120i Only) B.7
B
Paper/Quality tab
The Paper/Quality tab allows you to select the paper tray you
will use for the print job.
Property Description
Tray Selection Make sure that Paper Source is set to
the appropriate paper tray.
Use the Manual Feed source when
printing on special material. You need
to load one sheet at a time into the
Bypass tray. See page 3.8.
If you install an optional Tray 2 and set
Tray 2 in printer properties (see
page D.8), you can select Tray2.
If the paper source is set to
Automatically Select, the machine
automatically picks up print material in
the following order: the Bypass tray,
Tray 1, and optional Tray 2.
1
1