Xerox WorkCentre PE120-120i-3124 - Manual (Page 221)

Using USB Flash Drive 10.7
10
12 If you selected “BMP” in step 10, you are asked to select a
color format, Color, Gray, or Mono, by pressing the scroll
button (W or X).
If you selected “TIFF” or “PDF” in step 10, you can save a
multiple-page document as a single file. After you select
“TIFF” or “PDF”, the machine displays “Multi-Page Scan”
and offers you the choice of “On” or “Off.” If you select “On”
you can save multiple pages as a single file, but this feature
is only activated when you load your document into the
ADF. The ADF can handle documents of up to 50 pages at a
time.
13 Press Enter to make your selection.
14 To return to Standby mode, press Stop/Clear.
Deleting an Image File
To delete an image file that you scanned and saved on the USB
flash drive:
1 Make sure that the USB flash drive is inserted into the USB
port in front of the machine. If necessary, insert the USB
flash drive. See page 10.2.
2 Press Scan-to... on the control panel.
The first available menu item, “USB Memory,” appears on
the bottom line of the display.
3 Press Enter. The display shows the available memory space
for about 2 seconds and the first available menu item,
“Auto Scan,” appears on the bottom line of the display.
4 Press the scroll button (W or X) until you see “File Manage”
on the bottom line and press Enter.
The first available menu item, “Delete,” appears on the
bottom line of the display.
5 Press Enter.
6 Press the scroll button (W or X) until you find the folder or
file you want and press Enter.
If you see “D” in the front of a folder name, there are one
or more folders in the selected folder.