Xerox WorkCentre PE120-120i-3124 - Manual (Page 275)

Specifications E.7
E
N OTE : You may experience jams when using print materials with a length of less than
127 mm (5 in.). For optimum performance, ensure that you are storing and handling the
paper correctly. Please refer to “Paper Storage Environment” on page E.8.
Guidelines for Using Paper
For the best result, use conventional 75 g/m 2 (20 lb) paper. Ensure that the paper is
of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles,
voids, and curled or bent edges.
If you are unsure of what type of paper you are loading, such as bond or recycled
paper, check the label on the package.
The following problems may cause print quality deviations, jamming or even damage
to the machine:
Minimum size (custom) 76 x 127 mm (3 x 5 in) 60 to 120 g/m 2
bond (16 to
32 lb)
5 sheets of paper
for the Bypass
tray
Maximum size (Legal)
216 x 356 mm
(8.5 x 14 in)
Transparency
Same minimum and
maximum paper
sizes as listed
above.
138 to 146 g/m 2
Labels 120 to 150 g/m 2
Cards 90 to 163 g/m 2
Envelopes 75 to 90 g/m 2
*The machine supports a wide range of media sizes. See “Paper Type, Input Sources, and Capacities” on
page 3.2.
**Capacity may differ depending on media weight, thickness, and environmental conditions.
Symptom Problem with Paper Solution
Poor print quality or toner
adhesion, problems with
feeding
Too moist, too rough, too
smooth or embossed;
faulty paper lot
Try another kind of paper,
4 ~ 5 % moisture content.
Dropout, jamming, curl Stored improperly
Store paper flat in its
moisture-proof wrapping.
Increased gray background
shading/printer wear Too heavy
Use lighter paper, use the
rear output slot.
Excessive curl problems with
feeding
Too moist, wrong grain
direction or short-grain
construction
• Use the rear output slot.
• Use long-grain paper.
Jamming, damage to
machine Cutouts or perforations
Do not use paper with
cutouts or perforations.
Paper Dimensions * Weight Capacity **