Xerox WorkCentre PE120-120i-3124 - Manual (Page 254)

Printing From a Macintosh (W ORK C ENTRE PE120 I O NLY ) C.2
Installing Software for Macintosh
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
Refer to the table below for the driver available for your
machine.
Verify the following before you install the software:
1 Connect your machine to the computer using the USB cable
or the Ethernet cable. For details, see page 2.12 and
page 2.14.
2 Turn on your computer and the machine.
3 Insert the PS driver CD-ROM which came with your
machine into the CD-ROM drive.
4 Double-click the Xerox_MFP on your Macintosh desktop.
5 Double-click the Installer folder.
6 For Mac OS 8.6~9.3, double-click the Xerox WC PE120
Series_Classic icon.
For Mac OS 10.1~10.3, double-click the Xerox WC PE120
Series_OSX icon.
Your Machine Available Driver Connection
WorkCentre
PE120i
Mac OS 8.6~9.2 Network interface
Mac OS 10.1 ~
10.3
USB interface,
Network interface
Item Requirements
Operating system Mac OS 8.6 ~ 9.2/10.1~ 10.3
RAM
Mac OS 8.6~9.2 64 MB
Mac OS 10.1 ~ 10.3 128 MB
Free disk space 200 MB