Xerox WorkCentre PE120-120i-3124 - Manual (Page 46)

Getting Started 2.20
Setting the Time and Date
The current time and date are shown on the display when your
machine is on and ready to work. All of your faxes will have the
time and date printed on them.
N OTE : If power to the machine is cut off, you may need to reset
the correct time and date once the power has been restored.
1 Press Menu until “Machine Setup” appears on the top line
of the display.
2 Press the scroll button (W or X) to display “Date & Time” on
the bottom line and press Enter.
3 Enter the correct time and date using the number keypad.
Month = 01 ~ 12
Day = 01 ~ 31
Year = requires four digits
Hour = 01 ~ 12 (12-hour mode)
00 ~ 23 (24-hour mode)
Minute = 00 ~ 59
N OTE : The date format may differ from country to country.
You can also use the scroll button (W or X) to move the
cursor under the digit you want to correct and enter a new
number.
4 To select “AM” or “PM” for 12-hour format, press the or
button or any number button.
When the cursor is not under the AM or PM indicator,
pressing the or button immediately moves the cursor
to the indicator.
You can change the clock mode to 24-hour format (e.g.
01:00 PM as 13:00). For details, see page 2.21.