Xerox WorkCentre PE120-120i-3124 - Manual (Page 53)

Getting Started 2.27
2
You can set the length of time for which the scan lamp waits
after a scan job is completed before it switches to the power
save mode.
1 Press Menu until “Machine Setup” appears on top line of
the display.
2 Press the scroll button (W or X) until “Scan PWR Save”
appears on the bottom line. Press Enter.
3 Press the scroll button (W or X) until the time setting you
want appears on the bottom line.
The available time options are 0.5, 1, 4, 8, and 12 (hours).
4 Press Enter to save the selection.
5 To return to Standby mode, press Stop/Clear.