Xerox WorkCentre PE120-120i-3124 - Manual (Page 109)

Copying 5.5
5
4 Customize the copy settings including number of copies,
copy size, darkness, and original type, by using the control
panel buttons. See “Setting Copy Options” on page 5.7.
To clear the settings, use the Stop/Clear button.
5 If necessary, you can use special copy features, such as
Poster, Auto Fit, Clone, and 2 Sides on 1 page copying.
6 Press Start to begin copying.
The display shows the copy processing.
N OTES :
• You can cancel the copy job during an operation. Press Stop/
Clear, and the copying will stop.
• Dust on the document glass may cause black spots on the
printout. Always keep it clean.
• To get the best scan quality, especially for colored or gray-scaled
images, use the document glass.
Making Copies from the Automatic
Document Feeder
1 Load the document face up into the ADF (Automatic
Document Feeder). You can insert up to 50 sheets at a
time. Make sure that the bottom of the document stack
matches the paper size marked on the document tray.