Xerox WorkCentre PE120-120i-3124 - Manual (Page 234)

Using Your Machine In Linux A.8
Printers Configuration
Printers configuration has the two tabs; Printers and Classes.
Printers Tab
You can see the current system’s printer configuration by
clicking on the printer icon button on the left side of the MFP
Configurator window.
You can use the following printer control buttons:
• Refresh: renews the available printers list.
• Add Printer: allows you to add a new printer.
• Remove Printer: removes the selected printer.
• Set as Default: sets the current printer as a default printer.
• Stop/Start: stops/starts the printer.
• Test: allows you to print a test page to check if the machine
is working properly.
• Properties: allows you to view and change the printer
properties. For details, see page A.11.
Shows all of the
installed printer.
Switches to Printer
configuration.
Printer control
buttons. See
below.
Shows the status,
model name and
URI of your printer.