Xerox WorkCentre PE120-120i-3124 - Manual (Page 56)

Getting Started 2.30
3 The "Found New Hardware Wizard" will display. Confirm
that the radio button "Install the software automatically" is
chosen. Click Next.
4 The Wizard will begin to install the scan driver for the
PE120.
5 When the "Completing the Found New Hardware Wizard"
screen displays click Finish. The scan driver for the PE120
is now loaded.
6 The "Found New Hardware Wizard" will display. Confirm
that the radio button "Install the software automatically" is
chosen. Click Next.
7 The Wizard will begin to install the PCL Print driver for the
PE120.
8 The Hardware Wizard will search the CD-ROM drive for the
print driver and will display the following screen.