Xerox WorkCentre PE120-120i-3124 - Manual (Page 43)

Getting Started 2.17
2
If there is a number already set, the number appears.
3 Enter your fax number using the number keypad.
N OTE : If you make a mistake while entering numbers, press the
W button to delete the last digit.
4 Press Enter when the number on the display is correct. The
display asks you to enter an ID.
5 Enter your name or the company name using the number
keypad.
You can enter alphanumeric characters using the number
keypad, and include special symbols by pressing the 0
button.
For details on how to use the number keypad to enter
alphanumeric characters, see “Entering Characters Using
the Number Keypad” on page 2.17.
If you want to enter the same letter or number in
succession (e.g. SS, AA, 777), enter one digit, move the
cursor by pressing the X button, and enter the next digit.
If you want to insert a space in the name, you can also use
the X button to move the cursor to skip the position.
6 Press Enter when the name on the display is correct.
7 To return to Standby mode, press Stop/Clear.
Entering Characters Using the Number
Keypad
As you perform various tasks, you need to enter names and
numbers. For example, when you set up your machine, you
enter your name (or your company’s name) and telephone
number. When you store one-, two-, or three-digit speed dial or
group dial numbers, you may also enter the corresponding
names.
To enter alphanumeric characters: