Xerox WorkCentre PE120-120i-3124 - Manual (Page 47)

Getting Started 2.21
2
5 Press Enter when the time and date on the display is
correct.
When you enter a wrong number, the machine beeps and
does not proceed to the next step. If this happens, just
reenter the correct number.
Changing the Clock Mode
You can set your machine to display the current time using
either a 12-hour or 24-hour format.
1 Press Menu until “Machine Setup” appears on the top line
of the display.
2 Press the scroll button (W or X) until you see “Clock Mode”
on the bottom line and press Enter.
The clock mode currently set for the machine displays.
3 Press the scroll button (W or X) to select the other mode
and then press Enter to save the selection.
4 To return to Standby mode, press Stop/Clear.
Setting the Paper Size and Type
After loading paper in the paper tray, the standard Tray1,
Bypass tray, or optional Tray2, you need to set the paper size
and type using the control panel buttons. These settings will
apply to copy and fax modes. For PC-printing, you need to select
the paper size and type in the application program you use on
your PC.
1 Press Menu.
The display shows “Paper Setting” on the top line of the
display.
2 Press the scroll button (W or X) to display “Paper Size” on
the bottom line and press Enter to access the menu item.
The first item, “Tray Paper,” displays on the bottom line.