Xerox WorkCentre PE120-120i-3124 - Manual (Page 51)

Getting Started 2.25
2
N OTE : When PC-printing, you can also turn on or off the toner
save mode in printer properties. See page 4.8.
Toll Save Mode
Using the Toll Save button on the control panel, you can quickly
set your machine to send the document(s) stored in memory
during a preset time slot, when the call charge is lower. Toll Save
mode helps you to take advantage of lower long distance rates
at night, for example.
N OTE : The toll-saving time slot may vary depending on your
contract with your long distance phone company.
To turn the toll save mode on:
1 Press Toll Save. The button backlight turns on.
2 Press Enter when “Start Time” displays on the bottom line.
3 Enter the time and date when your machine starts sending
toll save faxes, using the number keypad.
To select “AM” or “PM” for 12-hour format, press the or
button or any number button.
4 Press Enter when the start time and date on the display is
correct.
5 Press the scroll button (W or X) to display “End Time” and
press Enter.
6 Enter the time and date when the toll save transmission
ends, using the number keypad.
7 Press Enter to save the setting.
8 To return to Standby mode, press Stop/Clear.
Once the toll save mode is activated, your machine stores into
memory all of the documents to be faxed and sends them at the
programed time.