Xerox WorkCentre PE120-120i-3124 - Manual (Page 176)

Maintenance 8.10
Setting the Notify Toner Option
If you set the Notify Toner menu option to “On,” your machine
automatically sends a fax to your service company or the dealer
to notify them that your machine requires a new toner cartridge
when the toner cartridge needs to be replaced. The fax number
is preset by your dealer when you bought your machine.
If machine was purchased directly from XEROX, then there will
NOT be a preset fax number.
1 Press Menu on the control panel until “Maintenance”
appears on the top line of the display.
The first available menu item, “Clean Drum,” displays on
the bottom line.
2 Press the scroll button (W or X) to display “Notify Toner” on
the bottom line and press Enter.
3 Press the scroll button (W or X) to change the setting.
Select “On” to enable this feature. Selecting “Off” disables
this feature.
4 Press Enter to save the selection.
Cleaning the Drum
If there are streaks or spots on your print, the OPC drum of the
toner cartridge may require cleaning.
1 Before starting the cleaning procedure, make sure that
paper is loaded in the machine.
2 Press Menu on the control panel until “Maintenance”
appears on the top line of the display.
The first available menu item, “Clean Drum,” displays on
the bottom line.
3 Press Enter.
The first available menu item,“Yes,” displays on the bottom
line.
4 Press Enter.
The machine prints out a cleaning page. Toner particles on
the drum surface are affixed to the paper.
5 If the problem remains, repeat steps 1 through 4.