Xerox WorkCentre PE120-120i-3124 - Manual (Page 139)

Faxing 7.13
7
Confirming Transmission
When the last page of your document has been sent
successfully, the machine beeps and returns to Standby mode.
When something goes wrong while sending your fax, an error
message appears on the display. For a list of error messages and
their meanings, see page 9.13.
If you receive an error message, press Stop/Clear to clear the
message and try to send the document again.
You can set your machine to print a confirmation report
automatically each time sending a fax is completed. For further
details, see the MSG Confirm item on page 7.4.
Automatic Redialing
When the number you have dialed is busy or there is no answer
when you send a fax, the machine automatically redials the
number every three minutes, up to seven times according to the
factory default settings.
When the display shows “Retry Redial?,” press Enter to redial
the number without waiting. To cancel the automatic redialing,
press Stop/Clear.
To change the time interval between redials and the number of
redial attempts. See page 7.3.