Festo Контроллер позиционирования CPX-CMPX - Manual (Page 79)

2. Assembly
2−35
Festo P.BE−CPX−SYS−EN en 0902e
Variant Mounting points
1 2
2
3 4
CPX terminal in plastic version with VTSA
pneumatics
Required mounting with:
Ĉ Left end plate
1 : two M4 or M6 screws
Ĉ For each additional mounting bracket
(not shown, needed if 4 or more inter−
linking blocks are used, see Tab. 2/4),
type CPX−BG−RW−...: one M4 screw
Ĉ Pneumatic interface 2: two M6 screws
with internal hex
Ĉ Optional: Mounting bracket 3 (second
variant not shown) for VTSA pneumatics
on the pneumatic supply plate: one M5
screw or one M5 and one M6 screw
Ĉ Right end plate 4: two M6 screws
1 2 3 CPX terminal in plastic version with Midi/
Maxi pneumatics
Required mounting with:
Ĉ Left end plate
1: two M4 or M6 screws
Ĉ For each additional mounting bracket
(not shown, needed if 4 or more inter−
linking blocks are used, see Tab. 2/4),
type CPX−BG−RW−...:one M4 screw
Ĉ Pneumatic interface 2: two M6 screws
Ĉ Right end plate 3: two M6 screws
Т
Т
Т
ТТ
ТТ
ТТ
1 2
2
3 CPX terminal in plastic version with CPA
pneumatics
Required mounting with:
Ĉ Left end plate
1: two M4 or M6 screws
each
Ĉ For each additional mounting bracket
(not shown, needed if 4 or more inter−
linking blocks are used, see Tab. 2/4),
type CPX−BG−RW−...:
one M4 screw
Ĉ Pneumatic interface:
two (optionally three) M4 screws 2
Ĉ Right end plate 3: two M4 screws
Tab. 2/6: Mounting points required for wall mounting (part 2)