Festo Контроллер позиционирования CPX-CMPX - Manual (Page 216)

C. General information on parametrisation
C−18
Festo P.BE−CPX−SYS−EN en 0902e
C.3.3 Signal status in Idle status (Idle mode)
This function is only relevant with certain fieldbus protocols
(see manual for CPX bus node).
Fundamentals
Idle mode parametrisation helps determine which signal
status outputs/valves should take when changing into the
Idle status. In this way a defined machine/system status
should be created.
Warning
Depending on the functions of the machine/system, the
manipulation of signal states can lead to serious personal
injury or material damage.
Use the Idle mode parametrisation very carefully, in order
to avoid damage.
CPX parametrisation
With CPX terminals, Idle mode parametrisation can be used
for:
ć Digital outputs
ć Analogue outputs
ć Valves
By means of the system parameter Idle mode, you can gloĆ
bally determine the signal status which the outputs/valves
are to assume when changing into the Idle status.