Festo Контроллер позиционирования CPX-CMPX - Manual (Page 162)

B. Parameters and data of the CPX terminal
B−8
Festo P.BE−CPX−SYS−EN en 0902e
B.2.2 System parameters
The system parameters refer to global functions of the CPX
terminal. The following system parameters are available:
Function no. System parameters
4400 Reserved
4401 Monitoring (active/inactive)
4402 Fail safe (reaction to communication faults)
4402 Force mode (enable/block force)
4402 System Idle mode (reaction when changing into the Idle status) 1)
4402 System start
4402 Analogue process value display (data format) 1)
1) Only relevant with certain fieldbus protocols (see manual for CPX bus node)
Tab. B/3: Overview ć system parameters
[........] The data and parameters which appear in English on the
handheld are shown in square brackets in this manual,
e.g. [Debounce time].
.