Festo Контроллер позиционирования CPX-CMPX - Manual (Page 184)

B. Parameters and data of the CPX terminal
B−30
Festo P.BE−CPX−SYS−EN en 0902e
Diagnostic memory data: Overflow
Function no. 3483
Description Specifies whether the diagnostic memory has overflowed.
Bit 0
Values
Bit 0
0
1
Overflow
Description
No overflow
Overflow
[no overflow]
[overflow]
Note The overflow is displayed when the first 40 faults are registered as well as when
the last 40 faults are registered. Overflow means that more than 40 faults have
occurred.
Tab. B/35: Overflow
Diagnostic memory data: Status
Function no. 3483
Description Specifies whether the error display is active or inactive.
Bit 1
Values
Bit 1
0
1
Description
Registering active
Registering inactive
[Recording active]
[Recording inactive]
Note The fault registering can be stopped and started with the run/stop filters.
Tab. B/36: Status
Structure of the diagnostic memory
The diagnostic memory contains up to 40 diagnostic entries.
A diagnostic entry consists of 10 bytes. The first five bytes
contain information on the fault time. The last five bytes conĆ
tain information on the fault. The structure of the diagnostic
entries is displayed in Tab. B/37.