Festo Контроллер позиционирования CPX-CMPX - Manual (Page 169)

B. Parameters and data of the CPX terminal
B−15
Festo P.BE−CPX−SYS−EN en 0902e
B.2.3 Module parameters
Module parameters refer to module−specific or channel−speĆ
cific functions. 64 bytes are available for parameters in each
module. Detailed information on the module parameters,
which are supported by the module used, can be found in the
manual for the relevant module. There you will also find inĆ
formation on possible parameter values and their presetĆ
tings.
Function number 1) Module parameters
4828 + m * 64 + 0 Monitoring the CPX module
4828 + m * 64 + 1 Reaction after short circuit/overload
4828 + m * 64 + 1 Input debounce time
4828 + m * 64 + 1 Signal stretching time
4828 + m * 64 + 3 Data format analogue value inputs
4828 + m * 64 + 3 Data format analogue value outputs
1) m = module number (counting on the modules from left to right, beginning with 0)
Tab. B/10: Overview of module parameters for module−specific functions
Function no. Example of some channel−specific module parameters
4828 + m * 64 + 6 Signal extension channel x
− 1) Monitoring wire fracture channel X
− 2) Fail safe channel x
− 2) Idle mode channel x
− 2) Forcing channel x
1) Function number, see manual for CPX modules
2) Access is protocol−specific (see manual for CPX bus node)
Tab. B/11: Overview − Example of some channel−specific module parameters