Festo Контроллер позиционирования CPX-CMPX - Manual (Page 179)

B. Parameters and data of the CPX terminal
B−25
Festo P.BE−CPX−SYS−EN en 0902e
Diagnostic memory parameter: Run/stop filter 2
Function no. 3484
Description Diagnostic memory filter with which you can determine when the registering of
errors is to be started or stopped.
Bit Bit 0...2
Values
Bit 2 1 0
0 0 0
Run/stop filter 2
MN = module number, CN = channel number,
FN = error number
Description
Run/stop filter 2 inactive (presetting)
[Run/Stop 2]
[Inactive]
0 0 1 Register up to the defined FN [Rec. up to def. FN]
0 1 0 Register up to the defined FN + MN [Rec. up to def. FN + MN]
0 1 1 Register up to the defined FN + MN + CN [Rec. up to def. FN + MN + CN]
1 0 0 Register as from the defined FN [Rec. as of def. FN]
1 0 1 Register as from the defined FN + MN [Rec. as of def. FN + MN]
1 1 0 Register as from the defined FN + MN + CN [Rec. as of def. FN + MN + CN]
1 1 1 Reserved −
Note The numbers are determined by means of the diagnostic memory parameters
Module, channel and error numbers" (function nos. 3485....3487).
Tab. B/26: Run/stop filter 2