Festo Контроллер позиционирования CPX-CMPX - Manual (Page 140)

5. Diagnostics and error handling
5−26
Festo P.BE−CPX−SYS−EN en 0902e
Error numbers of error class 2
No. Eliminating faults Operating status Handheld display
72 ...
79 Reserved
80 [Function failure] Module−specific operative
malfunction See manual for the relevant
module
81 ...
99 Reserved
100 [Configuration error] Fault in configuration or paraĆ
metrisation Check configuration, correct if
necessary or repeat commisĆ
sioning
101 [Execution error] Fault executing a positioning
job Check and, if necessary,
correct the positioning job
102 [Record error] Fault executing a positioning
record Check and, if necessary,
correct the positioning job
103 [Control error] Fault in control or in the paraĆ
meters of a positioning job Check and, if necessary,
correct the positioning job
104 [System error A] Fault in the process control or
the system configuration Check system configuration or
positioning job, I/O signals or
system status and correct as
necessary
105 [System error B] Fault in the peripherals; power
supply, operating pressure,
etc. Check peripherals, power supĆ
ply and operating pressure
106 [Error in valve] Fault in valve or on axis string Check valve or lines for
damage, if necessary replace
107 [Controller error] Fault in the controller or drive
regulator Check controller or drive reguĆ
lator for damage, if necessary
replace
108 [Encoder error] Fault in measuring system or
on axis string Check measuring system or liĆ
nes for damage, if necessary
replace
109 [Error motor or power
stage] Fault in the motor or power
section Check motor or power section
for damage, if necessary
replace