Allied Telesis AT 8000/8POE - Manual (Page 45)

AT-S81 Management Software User’s Guide
Section I: Using the Menus Interface 45
Enter new IP address>
b. Type the IP address for the SNTP server you want to use.
4. To set the SNTP interval:
a. Type I to select Set SNTP Interval.
The following prompt is displayed:
Enter Interval Time>
b. Type a number to specify the number of minutes between
occurrences of polling the SNTP server. The range is 1 to 60
minutes and the default is 1 minute.
5. To set the time zone:
a. Type Z to select Set Time Zone.
The Time Zone Configuration Menu is shown in Figure 9.
Figure 9. Time Zone Configuration Menu
b. Scroll through the list of time zones until you find one that matches
your time zone.
AT-8000/8POE Local Management System
Switch Tools Configuration -> Time Zone Configuration Menu
Time Zone : (GMT+8:00) Taipei
Daylight Saving : Disabled
Type Time Zone Nation or City
---- --------- -----------------------------------
1 (GMT-12:00) Eniwetok,Kwajalein
2 (GMT-11:00) Midway Islands, Samoa
3 (GMT-10:00) Hawaii
4 (GMT-09:00) Alaska
5 (GMT-08:00) Pacific Time (US & Canada):Tijuana
6 (GMT-07:00) Arizona
7 (GMT-07:00) Mountain time (US & Canada)
8 (GMT-06:00) Central Time (US & Canada)
9 (GMT-06:00) Mexico City, Tegucigalpa
10 (GMT-06:00) Saskatchewan
----------------------------- ----------------------------------
[N]ext Page
[S]et Time Zone
[P]revious Page [Q]uit to previous menu
Command>