Allied Telesis AT 8000/8POE - Manual (Page 325)

AT-S81 Management Software User’s Guide
Section II: Web Browser Interface 325
To download the AT-S81 image software onto the switch, perform the
following procedure:
1. From the Tools menu, select Image Upgrade.
The Image Upgrade page opens, as shown in Figure 103.
Figure 103. Image Upgrade Page
The Image/Version Date shows the current version and date of
software installed on the switch.
2. In the Download Server IP field, enter The IP address of the TFTP
server from which you are downloading the new software.
3. In the Download File Name field, enter the name of the AT-S81 file
you are downloading.
4. In the Retry Count field, enter the number of times you want the
switch to retry in the event a problem occurs during the download
process. The range is 1 to 20. The default is 5 times.
5. Click Apply.
The software immediately begins to download onto the switch. This
process takes a few minutes. After the software download is complete,
the switch initializes the software and reboots. You will lose your web
browser connection to the switch during the reboot process.