Allied Telesis AT 8000/8POE - Manual (Page 214)

Chapter 17: Working With System Files
214 Section I: Using the Menus Interface
4. Type S to select Set TFTP Server IP Address.
The following prompt is displayed:
Enter IP address of TFTP server:
5. Enter the IP address of the TFTP server.
6. Type F to select Set Configuration File Name.
The following prompt is displayed:
Enter file name>
7. Enter the file name of the configuration file on the TFTP server.
8. Type R to select Set Retry Count.
The following prompt is displayed:
Enter retry count>
9. Enter the number of times you want the switch to retry in the event a
problem occurs during the download process. The range is 1 to 20.
The default is 5 times.
10. To begin the download, type D to select Download Configuration
File.
The following prompt is displayed:
Download file? (Y/N)>
11. Type Y for yes to begin the downloading or N for no to cancel the
procedure.
After the downloading is complete, reset the switch to implement the
new settings.