Allied Telesis AT 8000/8POE - Manual (Page 126)

Chapter 9: Virtual LANs and GVRP
126 Section I: Using the Menus Interface
Displaying the
VLANs
To display a list of the VLANs on the switch, perform the following
procedure:
1. From the Main Menu, type A to select Advanced Switch
Configuration.
The Advanced Switch Configuration Menu is shown in Figure 21 on
page 87.
2. From the Advanced Switch Configuration Menu, type V to select
VLAN Management.
The VLAN Management Menu is shown in Figure 29 on page 122.
The currently configured VLANs are displayed in a table with the
following columns of information:
VLAN ID
The ID of the VLAN.
VLAN Name
The name of the VLAN.
VLAN Type
The type of VLAN, either permanent or static. Only the Default VLAN is
permanent. All other and tagged VLANs are static.
3. To view the ports of a VLAN, type O to select Config VLAN Member.
The following prompt is displayed:
Enter VLAN ID>
4. Enter the VID of the VLAN you want to view.