Allied Telesis AT 8000/8POE - Manual (Page 139)

AT-S81 Management Software User’s Guide
Section I: Using the Menus Interface 139
5. To change the egress priority queue assignment of an 802.1p traffic
class, do the following:
a. Type P to select Set Priority Queue.
The following prompt is displayed:
Enter traffic class>
b. Enter the traffic class whose egress priority queue you want to
change. The range is 0 to 7. You can specify only one traffic class
at a time.
The following prompt is displayed:
Enter queue for traffic class n >
c. Enter the new egress queue number for the traffic class. The range
is 0 to 3. 0 is the lowest priority queue and 3 is the highest. You can
specify only one egress queue.