Allied Telesis AT 8000/8POE - Manual (Page 233)

AT-S81 Management Software User’s Guide
Section II: Web Browser Interface 233
Enabling or Disabling the Telnet Server
To enable or disable the Telnet server, perform the following procedure:
1. From the Basic Config menu, select User Interface > User Interface.
The User Interface page is shown in Figure 65 on page 229.
2. For the Telnet Server parameter, choose Enable or Disable from the
list.
The default is Enable. When you enable this parameter, a Telnet
connection to the switch is available.
3. Click Apply.