Allied Telesis AT 8000/8POE - Manual (Page 284)

Chapter 25: Virtual LANs
284 Section II: Web Browser Interface
Restricting Management VLAN Access
Management access can be restricted to the default vlan (VLAN 1) or
made available on any VLAN. This feature is activated when you select
ENABLE in the Management VLAN field. If this field is set to DISABLED,
the management access is available on any VLAN.
1. From the Advanced Config menu, select VLAN Config. > VLAN Info.
The VLAN Information page opens, as shown in Figure 84 on page
282.
2. In the Management VLAN field, select Enable to restrict the
management access in the default vlan (VLAN 1) only or Disable to
allow management access on any vlan.
3. Click Apply.