Allied Telesis AT 8000/8POE - Manual (Page 229)

AT-S81 Management Software User’s Guide
Section II: Web Browser Interface 229
Setting the User Interface Configuration
This procedure explains how to adjust the user interface and security
features on the switch. With this procedure you can:
 Change the console timer, used to automatically end
inactive local management sessions.
 Change the AT-S81 management login user name and
password.
 Enable and disable the web server, used to manage
the switch from a remote management station with a
web browser.
To set the switch’s user interface configuration, perform the following
procedure:
1. From the Basic Config menu, select User Interface > User Interface.
The other selection on this menu, RADIUS, is described in Chapter 30,
“RADIUS Authentication Protocol” on page 311.
The User Interface page opens, as shown in Figure 65.
Figure 65. User Interface Page
The User Interface page has three parts:
 Console and Telnet UI Idle Time Out settings
 Server and SNMP settings
 User name and password settings