Allied Telesis AT 8000/8POE - Manual (Page 194)

Chapter 14: RADIUS Authentication Protocol
194 Section I: Using the Menus Interface
Displaying the RADIUS Server Settings
To display the RADIUS client status and settings, perform the following
procedure:
1. From the Main Menu, type B to select Basic Switch Configuration.
The Basic Switch Configuration Menu is shown in Figure 4 on page 32.
2. From the Basic Switch Configuration Menu, type U to select User
Interface Configuration.
The User Interface Configuration Menu is shown in Figure 7 on page
38.
3. Type R to select RADIUS Server Configuration.
The RADIUS Server Configuration Menu is shown in Figure 50 on
page 192. The top of the menu shows the current RADIUS server
configuration.