Allied Telesis AT 8000/8POE - Manual (Page 202)

Chapter 16: MAC Address Tables
202 Section I: Using the Menus Interface
Displaying the MAC Address Tables
To display the MAC address tables, perform the following procedure:
1. From the Main Menu, type B to select Basic Switch Configuration.
The Basic Switch Configuration Menu is shown in Figure 4 on page 32.
2. From the Basic Switch Configuration Menu, type M to select MAC
Address Table Menu.
The MAC Address Table menu is shown in Figure 52.
Figure 52. MAC Address Table Menu
Displaying the
MAC Addresses
by Port Number
To display the MAC addresses learned on a specific port, perform the
following procedure:
1. From the MAC Address Table menu, type P to select Display MAC
Addresses by Port.
The following prompt is displayed:
Enter port number >
2. Type a number for the port.
The Display MAC Addresses by Port menu is shown in Figure 53 on
page 203.
AT-8000/8POE Local Management System
Basic Switch Configuration -> MAC Address Table Menu
Display MAC Addresses by [P]ort
Display MAC Addresses by [M]AC
Display MAC Addresses by [V]ID
[Q]uit to previous menu
Command>