Allied Telesis AT 8000/8POE - Manual (Page 285)

AT-S81 Management Software User’s Guide
Section II: Web Browser Interface 285
Modifying a VLAN
This procedure allows you to perform the following functions:
 Change the name of a VLAN.
 Add or remove tagged ports from a VLAN.
Before performing this procedure, note the following:
 You cannot change the VID of an existing VLAN.
 You cannot add an untagged port to a VLAN using this
procedure. That function requires changing a port’s
VID value, as explained in “Configuring the PVID of
Untagged Ports” on page 280
 You cannot remove an untagged port from a VLAN
using this procedure. To remove an untagged port from
a VLAN, you must assign it as an untagged member of
another VLAN by changing its PVID, as explained in
“Configuring the PVID of Untagged Ports” on
page 280.
To change the name of a VLAN or to add or remove tagged ports, perform
the following procedure:
1. From the Advanced Config menu, select VLAN Config. > VLAN Info.
The VLAN Information page is shown in Figure 84 on page 282.
Use the Next Page and Previous Page buttons to scroll through the
list of VLANs.
2. In the VLAN Action column, click Modify next to the VLAN you want
to modify.
The Modify VLAN page opens, as shown in Figure 86.