Allied Telesis AT 8000/8POE - Manual (Page 232)

Chapter 19: Basic Switch Parameters
232 Section II: Web Browser Interface
Enabling or Disabling the Web Server
To enable or disable the web server, perform the following procedure:
1. From the Basic Config menu, select User Interface > User Interface.
The User Interface page is shown in Figure 65 on page 229.
2. For the Web Server parameter, choose Enable or Disable from the
list.
The default is Enable. When you enable this parameter, an individual
can manage the switch remotely using a web browser.
Note
Disabling the web server automatically ends your remote
management session.
3. Click Apply.