Allied Telesis AT 8000/8POE - Manual (Page 346)

Appendix A: AT-8000/POE Default Settings
346 Section: Reference
Basic Switch Default Settings
This section lists the default settings for basic switch parameters. The
following topics are covered:
 “System Reboot Default Settings,” next
 “User Interface Configuration Default Settings” on page 346
 “Management Interface Default Settings” on page 346
 “Ping Default Settings” on page 347
 “System IP Configuration Default Settings” on page 347
 “System Administration Configuration Default Settings” on page 347
System Reboot
Default Settings
The following table lists the system reboot default settings:
User Interface
Configuration
Default Settings
The following table lists the user interface default settings.
Management
Interface Default
Settings
The following table lists the management interface default settings.
Setting Default
Reboot Status Stop
Reboot Type Normal
Setting Default
Console UI Idle Timeout 5 minutes
Telnet UI Idle Timeout 5 minutes
Telnet Server Enabled
SNMP Agent Disabled
Web Server Enabled
User Name Manager
Setting Default
Manager Username manager
Manager Password friend
Console Idle Timeoutl 5 minutes