Allied Telesis SwitchBlade x3106 - Manual (Page 80)

Chapter 3: Installing the Chassis on a Table or in an Equipment Rack
80
Unpacking the AT-SBx3106 Chassis
To unpack the AT-SBx3106 Chassis, perform the following procedure:
1. Remove all components from the shipping package.
2. Verify the contents of the shipping container by referring to Figure 34
here and Figure 35 on page 81. If any item is missing or damaged,
contact your Allied Telesis sales representative for assistance.
Figure 34. AT-SBx3106 Chassis Items
One AT-SBx3106 Chassis
One AT-SBxFAN06 Module pre-
installed in the vertical slot on
the right side of the front panel
Four blank line card slot covers
Three blank power supply slot
covers pre-installed in power
supply slots A to C on the front
panel
One grounding lug pre-installed
on the left side on the back
panel