Allied Telesis SwitchBlade x3106 - Manual (Page 61)

SwitchBlade x3106 Installation Guide
61
SD Card Slot The secure digital (SD) memory slot is used for these management
functions:
 Store backup copies of the master configuration and database files
on the AT-SBx31CFC Central Fabric Controller card to an SD card
so that you can restore the current configuration or a previous
configuration, if needed.
 Transfer master configuration files between controller cards in
different chassis that are to have similar configurations.
 Transfer application load files between controller cards.
 Store streaming log files.
An SD card is optional. The AT-SBx31CFC Central Fabric Controller card
can operate without a memory card.
The following SD flash memory cards are officially supported in this
release.
 SanDisk 2GB Flash card
 SanDisk 4GB SDHC Flash card
Note
Other brands can be used but are not guaranteed to work.
For ordering information, contact your Allied Telesis sales representative
or visit our web site.
SD Status LED
The SD Status LED on the AT-SBx31CFC Central Fabric Controller card is
described in Table 16 on page 62.