Allied Telesis SwitchBlade x3106 - Manual (Page 62)

Chapter 1: Overview
62
Caution
To avoid losing data, do not remove an SD card when the SD status
LED is flashing green. Use the DEACTIVATE MEDIA command in
the SwitchBlade x3106 Management Software to disable the SD
card slot and wait for the SD status LED to turn off before removing
an SD card.
USB Port
The USB port is not supported at this time.
Table 16. SD Status LED
LEDs State Description
SD
Off The SD slot is empty, the SD card is
improperly installed, or the SD slot was
deactivated in the SwitchBlade x3106
Management Software.
Solid Green The SD card is properly installed in the
slot and ready to transfer data.
Flashing Green The AT-SBx31CFC Central Fabric
Controller card is retrieving or storing data
on the SD card.
Flashing Amber The controller card is detecting a problem
with the SD card. The card may be
installed improperly in the slot or there
may be a problem with the card itself.