Allied Telesis SwitchBlade x3106 - Manual (Page 44)

Chapter 1: Overview
44
Port LEDs on the Ethernet Line Cards
The following sections describe the port LEDs on the Ethernet line cards.
AT-SBx31GT24
Line Card
Each port on the AT-SBx31GT24 Line Card has two LEDs, but only one of
them is used. The LEDs are shown in Figure 20 and described in Table 5.
Figure 20. Port LEDs on the AT-SBx31GT24 Line Card
Table 5. Port LEDs on the AT-SBx31GT24 Line Card
LED State Description
L/A
Solid Green The port has established an 1000 Mbps link
to a network device.
Flashing
Green The port is transmitting or receiving data at
1000 Mbps.
Solid Amber The port has established a 10 or 100 Mbps
link to a network device.
Flashing
Amber The port is transmitting or receiving data at
10 or 100.
Off The port has not established a link with
another network device or the LEDs are
turned off. To turn on the LEDs, use the
eco-friendly button on the controller card.
Right LED - This LED is not used.