Allied Telesis SwitchBlade x3106 - Manual (Page 136)

Chapter 6: Installing the Transceivers and Cabling the Ports
136
Installing SFP Transceivers in the AT-SBx31GS24 Line Card
Please review the information in “Guidelines to Installing SFP, SFP+,
CSFP, and XFP Transceivers” on page 135 before performing this
procedure.
To install SFP transceivers in the AT-SBx31GS24 Line Card, perform the
following procedure:
1. Remove the transceiver from its shipping container and store the
packaging material in a safe location.
2. Remove the dust cover from the SFP slot chosen for the transceiver.
Figure 87 shows the removal of the dust cover from transceiver slot 0
on the line card in chassis slot 0.
Figure 87. Removing the Dust Cover from an SFP Slot in the AT-
SBx31GS24 Line Card