HP 3PAR Operating System Software - Manual (Page 65)

2. Verify the following:
•
The Target Information area shows a Status of ready.
•
The Link Information area shows a Status of Up for all the links.
The following example shows the showrcopy command output for SystemA:
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
SystemB 6 FC ready 2FF70002AC0000C3 mirror_config
SystemC 7 IP ready mirror_config
Link Information
Target Node Address Status Options
SystemB 0:1:1 20210002AC0000C3 Up
SystemB 1:3:2 21210002AC0000C3 Up
SystemC 2:4:1 10.100.33.63 Up
SystemC 3:4:1 10.101.33.63 Up
receive 0:1:1 20210002AC0000C3 Up
receive 1:3:2 21210002AC0000C3 Up
receive 2:4:1 receive Up
receive 3:4:1 receive Up
3. Repeat Step 1 and Step 2 on one of the backup systems (SystemB).
The following example shows the showrcopy command output for SystemB:
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
SystemA 4 FC ready 2FF70002AC000060 mirror_config
SystemC 5 IP ready mirror_config
Link Information
Target Node Address Status Options
SystemA 0:1:1 20110002AC000060 Up
SystemA 1:3:2 21320002AC000060 Up
SystemC 2:4:1 10.100.33.63 Up
SystemC 3:4:1 10.101.33.63 Up
receive 0:1:1 20110002AC000060 Up
receive 1:3:2 21320002AC000060 Up
receive 2:4:1 receive Up
receive 3:4:1 receive Up
Checking the Links between Systems for SLD Remote Copy 65