HP 3PAR Operating System Software - Manual (Page 25)

4 Gathering Setup Information
1. Contact your network administrator to obtain:
• IP addresses or 64-bit World Wide Name (WWN) address information for the interfaces of the storage systems
• Gateway IP addresses, netmask, and IP addresses for each link
• Any additional details about the network connections that might be useful
2. Verify that the firewall settings allow the remote-copy systems access to TCP port 5785.
3. Use the provided worksheets to organize the data. Use multiple copies of the relevant worksheet if the remote-copy
configuration has more than two systems.
Use these worksheets: To organize data for this configuration:
“Network and RCIP Setup—Example Initial-Pair
Worksheet” (page 28) Unidirectional 1-to-1
Bidirectional 1-to-1
RCIP
“Network and RCIP Setup—Example Initial-Pair
Worksheet” (page 28) N-to-1
1-to-N
and
M-to-N
“Network and RCIP Setup Information—Example
Additional Pairs Worksheet” (page 29)
, as many
times as necessary
SLD
“Network and RCFC Setup Information—Example
Worksheet” (page 35) Unidirectional 1-to-1
Bidirectional 1-to-1
RCFC
“Network and RCFC Setup Information—Example
Worksheet” (page 35)
, as many times as necessary
N-to-1
1-to-N
M-to-N
SLD
25